Anycubic celebrates its 7th anniversary with the launch of a revolutionary 3D printer

Shenzhen, China, September 2, 2022 /PRNewswire/ — Anycubic, a world-famous 3D printer brand, celebrated its 7th anniversary on September 2, 2022 with a new online product launch under this year’s slogan, “Seeking Freedom, Inventing to Exceed”.

“Anycubic continues to innovate and incorporate the latest patented technologies into new products. We have introduced Anycubic’s first DLP-based desktop product, the Photon Ultra, the M3 series equipped with our innovative source technology of LighTurbo light, and the Kobra series has adopted LeviQ self-leveling technology. All of this demonstrates our strong technological strength, and there is even more to come after our 7th anniversary,” said james ouyangvice-president of Anycubic.

Photon Anycubic D2 Brings a revolutionary advancement to the consumer 3D printing industry

The second-generation Photon D2 DLP printer is an upgrade from Anycubic’s previous Photon Ultra. Photon D2 continues to use Texas Instruments’ lighting solution for in-depth exploration of a groundbreaking advancement in the 3D printing industry.

  • Dual algorithms for higher accuracy

The latest light uniformity compensation algorithm greatly improves the light uniformity to 92%, which means that the energy in each exposure location is almost the same, thus contributing to a printing result more consistent. On the other hand, the 16-step gray anti-aliasing algorithm ensures a clean, crisp and smooth surface of the printed thumbnails.

  • Hassle-free screen care

A DLP printer adopts a different lighting solution than an LCD printer, which means that DLP printers do not need screen replacement. Without a consumable exposure screen, Photon D2 uses a projector with a lifespan of 20,000 hours, making screen replacement a hassle-free task.

  • Larger dimensions for creation

Photon D2 gives users greater scope for creativity while ensuring high precision. Compared to Photon Ultra, Photon D2 size and print area increase to 130mm x 73mm x 165mm and 95cm2162% and 55%, respectively.

  • Quiet and low power consumption

The application of DLP technology gives 3D printers such features as low heat generation, low noise and low power consumption. The heat generated during operation can be effectively controlled within 45 degrees without external ventilation instruments. Photon D2 operates at just 35 decibels, creating a quiet printing experience, and Photon D2’s power consumption is only 15 watts, 25% of the power consumption of ordinary LCD 3D printers on the market, making it low carbon and energy efficient. .

Anycubic Kobra Go Offers beginners the Anycubic LeviQ self-leveling system

Upgrading has always been a major challenge for new users of FDM printers. To welcome and attract more users into the world of 3D printing, Anycubic continues to use Kobra series technology and, in particular, integrates the Anycubic LeviQ automatic leveling system into the entry Kobra Go range at an affordable price.

  • Fun build, fun print

Kobra Go adopts a modular DIY assembly. The DIY assembly guides beginners to better understand how an FDM printer works.

Kobra Go is equipped with the in-house developed Anycubic LeviQ self-leveling system. With the Anycubic LeviQ Auto Bed Leveler, the leveling process has been simplified and an effortless leveling experience awaits beginners. The whole leveling procedure takes only six minutes, saving beginners from this most difficult procedure.

The popular PEI coated sheet metal also goes with Kobra Go. The quality sheet metal is resistant to wear, impact and bending. With the magnetic print bed, the sheet sits firmly and when finished, users can easily remove the models by slightly bending the sheet.

Even as an entry-level product, Kobra Go makes no sacrifices with its printing speed. Typical print speed is 60mm/s and can reach up to 100mm/s. The machine adopts the self-developed separate extruder, which makes printing even faster.

Kobra Go’s printing volume and size are 12.1 liters and 220 x 220 x 250 mm respectively, meeting various printing needs.

Anycubic LightTurbo2.0 enables even better printing accuracy

Light source technology has always been the bottleneck for LCD 3D printers to achieve greater precision. Anycubic’s new generation LighTurbo2.0 light source adopts COB lens + curved reflector, which turns wide-angle light into small-angle light. It then converts the light into nearly collimated light through a curved reflector, which solves the problem of stray light interference caused by the lens and ensures high-precision printing.

Anycubic Collaborates with JBD to Explore MicroLED Application in 3D Printers

Anycubic and JBD jointly developed Anycubic’s first consumer MicroLED 3D printer. The application of MicroLED in 3D printers opens the possibility of printing miniature and microfluidic models with astonishing precision and at a lower cost and is a perfect demonstration of Anycubic’s efforts in pursuing advances in 3D printing.

Anycubic ABS-Like Resin Pro delivers outstanding performance to professional fields

Anycubic ABS-Like Resin Pro offers high strength, toughness, precision and shockproof capabilities. Compared with standard resin, the greatly improved performance enables Anycubic ABS-Like Resin Pro to effectively prevent parts from being damaged during use, meeting models with higher material performance requirements.

Price and availability:

Anycubic Photon D2 is now available on Anycubic official store, Amazon, eBay, AliExpress and Walmart. Anycubic Kobra Go will start presale from September 12, 3:00 a.m. EDTSeptember 27, 3:00 a.m. EDT on Anycubic official store, Amazon, eBay, AliExpress and Walmart. Anycubic ABS-like Resin Pro will be available on September 26, 2022on Anycubic official store, Amazon, eBay and AliExpress.

Anycubic Photon D2: from 679 USD
Anycubic Kobra Go: from $189 (Pre-sale price)
Anycubic ABS-like Resin Pro 1KG: $42

To note: Price and availability may vary by country or region. The price indicated is only indicative.

About Anycubic

Anycubic is a professional 3D printing industry brand specializing in the R&D, manufacturing and sales of 3D printers, providing many affordable, high-performance and smart printers for consumers, hobbyists, schools and designers of products. Since its inception in 2015, we have been committed to propelling 3D printing technology to empower people of all walks of life to unleash their imaginations and turn creativity into reality. For more information about Anycubic, please visit the company’s website.

Photo – https://mma.prnewswire.com/media/1889769/Anycubic_Photon_D2.jpg
Photo – https://mma.prnewswire.com/media/1889770/Anycubic_Kobra_Go.jpg
Logo – https://mma.prnewswire.com/media/1834106/983dfccce373fc0ea429fda2723d269_Logo.jpg

SOURCE SHENZHEN ANYCUBIC TECHNOLOGY COMPANY LIMITED