[ad_1]
If your 3D printing filament needs a bit of revitalization and has absorbed a little too much moisture from the air causing your 3D prints to warp. You might be interested in a new 3D printing filament dehydrator that can bring your 3D filament back to life with the push of a button, say its creators.
An easy indication to see if your 3D printing filament has moisture ingress is when you see small bubbles forming during printing where the water evaporates when it hits the hot print head. Small bubbles can be seen in the final print and degrade the final finish requiring additional post-printing work to create a smooth finish. Advance commitments at a special price are now available for the recently launched project starting at around $ 49 or £ 37 (according to current exchange rates).
Remove moisture from your 3D printing filament with Hex
“A smart filament dehydrator that brings your filament back to life with the push of a button. No complicated settings or interfaces. A powerful setup can dehumidify the room in just 10 minutes with minimal power consumption. Perfect prints avoid long post-processing. We have designed Hex ° to be as straightforward as possible because restoring your filament is actually a straightforward process. The only objective in mind: EVACUATE WATER / MOISTURE.
If the Hex crowdfunding campaign successfully achieves its required engagement goal and the project progresses smoothly, the global shipment is expected to take place around May 2022. Learn more about the 3D Printer Filament Dehydrator Project Hex, watch the promo video below.
“Hex was designed to be durable and long lasting. Using simple circuitry, solid parts and quality components, Hex ° is designed to do the job it was designed to do over and over again. Since you can’t over-dry the filament (unless you’re melting it), presets are unnecessary and confusing. Wouldn’t it be much easier to press a button without caring? “
“THETA ° is a renewable energy technology company offering the possibility of a renewable, sustainable and better future. This applies to all products. Everything we have built is and will be better than anything else, because for the future to be sustainable, every part must be used efficiently. “
For a complete list of all the specials available for early risers, extension lenses, additional brackets and more features for the 3D Printer Filament Dehydrator, go to the official Hex Crowdfunding Campaign page. by consulting the link below.
Source : Kickstarter
Filed Under: Gadgets News
Latest Geeky Gadgets Deals
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets can earn an affiliate commission. Learn more.
[ad_2]